Del ozone Spa-Eclipse Installationshandbuch PDF herunterladen (Seite 6)

Eclipse Installation & Operations Manual

after all other pool equipment (pump, filter, heater, and cleaner).

Figure 2 shows the most basic installation. For installation with

additional sanitizers and pool cleaners, refer to Appendix A.

Locate an appropriate section of the return line and install the

injector manifold with PVC cement. Be very careful to observe and

follow the correct water flow direction (as indicated by the arrow on

the injector manifold).

2D-2. Water Check Valve

If the pool equipment is mounted above the water line, a check

valve must be installed between the pump outlet and the Injector

Manifold. This will prevent the pump from draining and losing its

prime (when not in use).

Note: If a 1/3# DELCheck

is used, do not install immediately after

chlorine feeders.

2D-3. Pressure Test

If a pressure test is required, it should be performed prior to

connecting the Ozone Gas Line. Install the 3/4” pipe cap provided

onto the Injector for the pressure test.

Figure 2: Injector Manifold Mounting Location

WATER FLOW

Pool

Pump

Filter

Heater

Eclipse

System

Injector

Manifold

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Del ozone Spa-Eclipse Installationshandbuch Seite 6